Scheduler; Vending; Service Information; Factory Reset - Bunn Sure Immersion 220 Programming Manual

Scheduler

1. When Scheduler is enabled, the on/off,
times/days of the week can be set to allow
vending (brewing/dispensing). This can be used
in conjunction with Energy Saver.
2. In this example, the machine is set to allow
vending between 6:00 AM through 6:00 PM
on Monday through Friday.
3. The Password Required To Exit checkbox
means that a password (number) must be
entered to allow vending.
4. Press Save to confirm.

Vending

1. If the cashless vending kit has been installed,
press the box to enable the Vending mode.
If the information shown is populated, Serial
Number:, Software Version:, etc, then a
successful connection to the vending card
reader has been established.
2. If any changes to the screen have been made,
press Save to confirm.

Service Information

1. In the event service may be required,
information for contacting the appropriate
service provider may be entered on this screen
for ready access.
2. If any changes to the screen have been made,
press Save to confirm.

Factory Reset

Pressing the red button will cause stored values to
be restored to the default setting the machine had
when it shipped from the factory.
Caution! This will remove custom setting and
images, and can NOT be undone!
MACHINE SETTINGS (Continued)
1
20
3
1
2
4
2
2
102318