Dual Users Operation - Amrotec X-1 Series Instruction Manual

Dual Users Operation

X-1 supports simultaneous counting operation of two users. Two users can operate X-1 with
maintaining their current preference. The results are not interfered with each other. At the end of
counting operation, the counting results of the two users are saved separately. (The device has
dual-RS232 ports that connect to two thermal or dot-matrix printers. Please check P.23 to see how
to set thermal or dot-matrix printers for two users). To describe the Dual Users function in details,
X-1 control panel is equipped with two sets of
control the operation of two users.
The LEFT set of keys is for
The RIGHT set of keys is for
(User 1 - LEFT).
Press the
and
for the User 1.
Press the
(User 2 - RIGHT).
Press the
and
operation for the User 2.
Press the
Clearing result.
Press to clear results of the current User (
AMROTEC®
12
(User 1).
(User 2)
key on the left side to start operation.
keys on the left side are used to confirm or cancel entire counting operation
on the right side to switch to User 2.
key on the right side to start operation.
keys on the right side are used to confirm or cancel the entire counting
key on the left side to switch to User 1.
and
/ ).
keys which are used to