Amrotec X-1 Series Instruction Manual page 13

CNT Mode and Density selection:
CNT - Count Mode
In CNT mode, X-1 counts number of banknotes despite of denomination in a stack and at the
end of the count, displays counted quantity at the center row of the LCD display. In the process, the
total counted quantity is accumulated automatically and saved to memory.
key is used to select CNT mode. Press and hold
Mode) will be shown on the left top of the LCD display as below:
♦ Use the direction keys
♦ Press the
Density Level:
In CNT mode, user has the option to select between different density level to adjust double
detection. While in CNT mode,
Press [Mode] key to select between four different double detection level. If the device cannot detect
double feeding error well, then set double detection level to "Lv1" represents "LIGHT"; on the
contrary if the device detects double even though notes are not double fed, then set double detection
level to "Lv3" or "Lv4" represents DARK or VERY DARK respectively.
: LIGHT
: NORMAL (Default)
: DARK
: VERY DARK
♦ Use the direction keys
highlight your acceptable double detection level ("Lvx")
♦ Press the
/
to confirm the selection.
/
to confirm the selection.
DRAFT - HIGHLY CONFIDENTIAL
or the / to highlight CNT mode.
or the / to
key and the
CNT (Count
Operating X-1 13