Installing The Air Spring Assemblies - Air Lift LoadLifter 5000 Series Installation Manual

5. Figure 15 shows both left and right assemblies ready to install.

INSTALLING THE AIR SPRING ASSEMBLIES

1. Install a large flat washer (T) over the hex-head bolt (M) and thread the wire bolt
2. Insert the bolt and washer through the slot in the side of the frame, and through the
10
Right (passenger's)
side assembly
leader tool (H) onto the threads of the bolt (fig. 16).
(M)
slot in the bottom of the frame the ABS line holder was removed (fig. 17). Repeat for
the other side.
LoadLifter 5000 Series
Left (driver's)
side assembly
(T)
(H)
fig. 15
fig. 16
fig. 17
MN-1045