Introduction; Notation Explanation - Air Lift LoadLifter 5000 Series Installation Manual

Introduction

The purpose of this publication is to assist with the installation of the LoadLifter 5000 series
air spring kits. All LoadLifter 5000 series kits utilize sturdy, reinforced, commercial-grade
single or double, depending on the kit, convolute bellows.
The air springs are manufactured like a tire with layers of rubber and cords that control
growth. LoadLifter 5000 kits provide up to 5,000 pounds (2,268kg) of load-leveling support
with air adjustability from 5-100 PSI (.34-7BAR).
It is important to read and understand the entire installation guide before beginning
installation, as well as, read and understand the entire user guide before performing any
maintenance, service or repair.

NOTATION EXPLANATION

Hazard notations appear in various locations in this publication. Information which is
highlighted by one of these notations must be observed to help minimize risk of personal
injury or possible improper installation which may render the vehicle unsafe. Notes are used
to help emphasize areas of procedural importance and provide helpful suggestions. The
following definitions explain the use of these notations as they appear throughout this guide.
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL INJURY
DANGER
OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
WARNING
PERSONAL INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE TO
CAUTION
THE MACHINE OR MINOR PERSONAL INJURY.
4
LoadLifter 5000 Series
MN-1045