Off Timer; Pip Operation - Sanyo LCD-32CA9S Owner's Manual

Sanyo flat panel television user manual
Hide thumbs Also See for LCD-32CA9S:
Table of Contents

Advertisement

BASIC OPERATION
To set OFF TIMER by pressing TIMER button on Remote Control. The timer dialogue box will appear on the
screen for a short while.
To select "0 min", "30 min", "60 min", "90 min" or "120 min" with TIMER buttons.
Using PIP function, you can enjoy a TV program and an image such as DVD input from a rear terminal at
the same time.
1
Press PIP button to display sub picture.
2
Each time PIP button is pressed, the location of sub picture is changed as follows.
3
During PIP mode, pressing the MAIN/SUB button will switch main and sub picture.
The sound on the main picture and the sub-picture also changes at the same time.
4
Press CHANGE button in PIP mode can switch input source in Sub picture. (Refer to this page "PIP
Combination".
5
Press PIP button or POWER ON/OFF button to exit PIP mode.
Sub Picture
Note:
The controls belongs to the picture which is TV input in PIP mode. Otherwise, it belongs to the main
picture.
The following combination (Main and Sub picture) in the PIP mode, "
and "X" indications that it is impossible for combination.
Note: DVD input terminal should be connected so that AV2-DVD in the following table can be combined with TV or AV1-S,
otherwise it cannot be combined with TV or AV1-S.
MAIN
SUB
PC
HDMI 2
HDMI 1
TV
AV1-S
AV2-DVD
20

OFF TIMER

PIP OPERATION

Main Picture
Combination of the Main-picture and Sub-picture
PC
HDMI 2
X
X
X
" indicates that it is possible for combination,
HDMI 1
TV
AV1-S
X
X
X
X
AV2-DVD
X
X
X

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcd-37ca9sLcd-42ca9s

Table of Contents