System - Sanyo LCD-32CA9S Owner's Manual

Press MENU button and the main menu will appear. Press
1
POINT buttons to select "SYSTEM", and will display
SYSTEM menu.
2
Press POINT buttons to select the item desired.
Press POINT buttons to adjust value.
3
Press BACK button to return to the previous menu.
Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 29) to exit menu operation.
ECO
This function can automatically adjust panel's brightness by ambient
brightness.
Press POINT buttons to set "ON" or "OFF".
CHILD LOCK
When CHILD LOCK is set "ON", the Side Control buttons will be
locked except for POWER ON/OFF button .
PC ADJUST
This function is used to adjust the position of image displayed on
screen. It can be selected when the LCD TV could be received PC
signal and in PC mode. (Refer to "SIGNAL MODE COLUMN" on
page 38.)
Press POINT buttons to enter PC SCREEN menu. It can
be select "AUTO", "H-POSITION", "V-POSITION", "CLOCK" or
"PHASE" to adjust.
AUTO ADJUST
Press POINT buttons, and the TV automatically detects
incoming signal, and adjust itself to optimize its performance. If the
image is not displayed properly, a manual adjustment is required
(Refer to following adjustments).
H-POSITION
The horizontal picture position will be moved to the left side by
pressing POINT button. And it will be moved to the right side by
pressing POINT button. (0~100)
V-POSITION
The vertical picture position will be moved down side by pressing
POINT button. And it will be moved up side by pressing POINT
button. (0~100)
CLOCK
Eliminate flicker from the image. Press POINT
adjust CLOCK. (0~100)
PHASE
Eliminate disorder from the image. Press POINT
adjust PHASE. (0~100)
MENU OPERATION (PC/HDMI mode)

SYSTEM

SCREEN MENU
ECO
CHILD LOCK
PC ADJUST
ＳＥＬ
Ａ ＤＪ
ECO
CHILD LOCK
PC ADJUST
ＳＥＬ
Ａ ＤＪ
ECO
CHILD LOCK
PC ADJUST
ＳＥＬ
Ａ ＤＪ
AUTO ADJUST
H-POSITION
V-POSITION
CLOCK
PHASE
SEL ADJ
buttons to
buttons to
ＢＡＣＫ ＢＡＣＫ ＭＥＮＵ ＥＸＩＴ
OFF
ＢＡＣＫ ＭＥＮＵ
ＢＡＣＫ ＥＸＩＴ
OFF
ＢＡＣＫ ＭＥＮＵ
ＢＡＣＫ ＥＸＩＴ
START
MENU
BACK BACK EXIT
33