Advertisement
R
will be displayed after the search has finished and these can be added to the log by checking the boxes
and pressing "Finish" on the wizard.
Manually Adding Climate Stations
If the search wizard is unable to locate some Climate Stations these may be added manually using the
button. A wizard will prompt for the host name or IP address of the station. The host name is a
unique label that is attached to every device on a network. Often this is the same as the "computer name"
that you can edit manually in windows. Every computer on a network also features a unique IP address,
which is what the network uses to route data to individual devices. Once the information is entered the
application will attempt to connect to the station at this address. If successful, the station will be added to
the log.
The main log screen will now be populated with the Climate Stations that have been added and the
application will attempt to connect to them and periodically request data. Information is displayed on
screen about when the last measurement set was downloaded from each station.
Additional Settings
The log software generates a daily report at 12:15am every day for the previous day's data. To specify the
folder in which they are placed click the "Settings" tab and browse for the desired location. Leaving this
area blank will disable report creation.
Also available on this screen is a facility to protect the database with passwords for administrators and
users as well as a choice of units for the specific humidity reading. Finally, a logo can be placed in the top
6
Advertisement
