Advertisement
R
Then browse to the file location and complete the wizard. All settings will be applied the next time the
server makes contact with the Climate Station.
If the option to edit the station setup is selected instead, the wizard will continue and request which
parameters you wish to monitor (these are the parameters that appear in the main Elcomonitor View
window) check or uncheck the desired boxes.
The following screens allow you to apply tolerance bands to the parameters that can control the signal
light. These tolerance bands will also colour selected parameters on the Elcomonitor View main screen.
The tolerances may be split into two or three zones depending on your requirement. The two zone
tolerance band option uses red and green colours whilst the three zone band uses red, yellow and green.
If you do not wish to set tolerances for each measurement select "No Zones".
12
Advertisement
