Advertisement
R
When started for the first time, the software will request the address of the computer running the
Elcomonitor Log application. If this is the same as the computer on which you are installing the view
application on then leave this as "localhost". The program will now start and you will be presented with a
dialog box requesting what level of access is required for a choice of either "Administrator" or "User". The
features offered to both are as follows.
Note: Should you be unsure about the IP address of the server it is displayed in the "About" menu of the
Log application.
View Station State
Generate Report
Setup Station
Setup Filter on Station
Stations
Stations are displayed in an alphabetically sorted grid with the individual climatic parameters selected by
the user. Measurements that have had limits defined are shown colour coded red, yellow or green in the
measurement panel as well as along the bottom of the screen.
8
Administrator
•
•
•
•
User
•
•
Advertisement
