HP ProOne 600 Hardware Reference Manual
Hide thumbs
Also See for ProOne 600:
- Illustrated parts & service map (4 pages) ,
- Hardware reference manual (59 pages) ,
- Hardware reference manual (40 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HP ProOne 600
Summary of Contents for HP ProOne 600
- Page 1 Hardware Reference Guide...
- Page 2 United States and/or other countries. bound by the terms of the HP End User License Not all features are available in all editions or Agreement (EULA). If you do not accept these The information contained herein is subject to versions of Windows.
-
Page 3: About This Guide
About This Guide This guide provides basic information for upgrading this computer model. WARNING! Indicates a hazardous situation that, if not avoided, could result in serious injury or death. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. IMPORTANT: Indicates information considered important but not hazard-related (for example, messages related to property damage). - Page 4 About This Guide...
-
Page 5: Table Of Contents
Table of contents 1 Product features ............................1 Overview ................................1 HP ProOne 600 21.5-inch and HP ProOne 400 23.8-inch components ..............2 Front components ..........................2 Side components ..........................3 Rear components ..........................4 Bottom components ..........................4 HP ProOne 400 20-inch components ........................5 Front components .......................... - Page 6 Webcam ................................17 Webcam operation ..........................17 Setting up Windows Hello ......................... 17 Synchronizing the optional wireless keyboard and mouse ................18 3 Hardware repair and upgrade ........................21 Warnings and cautions ............................21 Additional information ............................21 Removing batteries from the optional wireless keyboard or mouse ..............22 Removing and installing the rear cover ......................
- Page 7 Accessibility for HP products ..................34 Standards and legislation ............................ 35 Standards ............................35 Mandate 376 – EN 301 549 .................... 35 Web Content Accessibility Guidelines (WCAG) ..............35 Legislation and regulations ......................35 United States ........................36 21st Century Communications and Video Accessibility Act (CVAA) ....... 36 Canada ..........................
- Page 8 viii...
-
Page 9: Product Features
Product features Overview NOTE: To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. Overview... -
Page 10: Hp Proone 600 21.5-Inch And Hp Proone 400 23.8-Inch Components
HP ProOne 600 21.5-inch and HP ProOne 400 23.8-inch components Front components Table 1-1 HP ProOne 600 21.5-inch and HP ProOne 400 23.8-inch front components Front components Webcam microphones (2) (optional) Webcam/IR lens (optional) IR light (optional) IR LED (optional) -
Page 11: Side Components
Side components Table 1-2 HP ProOne 600 21.5-inch and HP ProOne 400 23.8-inch side components Side components Optical disc drive (optional) USB Type-C port NOTE: The USB Type-C port does not support video output. Optical disc drive light (optional) USB SuperSpeed (charging) port... -
Page 12: Rear Components
Rear components Table 1-3 HP ProOne 600 21.5-inch and HP ProOne 400 23.8-inch rear components Rear components DisplayPort connector (optional) RJ-45 (network) jack – or – HDMI port (optional) – or – Serial port (optional) USB SuperSpeed ports with wake from keyboard or mouse (2) -
Page 13: Hp Proone 400 20-Inch Components
HP ProOne 400 20-inch components Front components Table 1-5 HP ProOne 400 20-inch front components Front components Webcam LED (optional) Webcam microphone (optional) Webcam lens (optional) Speakers (2) (optional) Side components Table 1-6 HP ProOne 400 20-inch side components Side components... -
Page 14: Rear Components
Table 1-6 HP ProOne 400 20-inch side components (continued) Side components Optical disc drive eject button (optional) USB SuperSpeed port SD memory card reader (optional) Audio-out (headphone)/Audio-in (microphone) combo jack Rear components Table 1-7 HP ProOne 400 20-inch rear components... -
Page 15: Bottom Components
Bottom components Table 1-8 HP ProOne 400 20-inch bottom components Bottom components Power button Hard drive activity light Power light Special keys Your keyboard may be different. Table 1-9 Special keys Special keys Sleep Mute Fast reverse Volume down Play/Pause... -
Page 16: Locating The Serial Number And Product Number
Locating the serial number and product number The serial number and product number are located on a label on the bottom edge of the bezel. You may need these numbers when contacting HP about the computer model. Chapter 1 Product features... -
Page 17: Setup
Attaching a fixed-height stand To install the stand: Place the computer facedown on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage. -
Page 18: Removing A Fixed-Height Stand
Disconnect the power cord from the AC outlet, and then disconnect any external devices. Place the computer facedown on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage. -
Page 19: Removing An Adjustable Height Stand
Disconnect the power cord from the AC outlet, and then disconnect any external devices. Place the computer facedown on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage. -
Page 20: Attaching The Computer To A Mounting Fixture
Attaching the computer to a mounting fixture The computer can be attached to a wall, swing arm, or other mounting fixture. IMPORTANT: This computer supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the computer, four 4 mm, 0.7 pitch, 20–mm long screws are required. These screws are supplied with the computer. -
Page 21: Connecting And Disconnecting Cables
If you are adding a monitor that has a DisplayPort connector, no video adapter is required. If you are adding a monitor that does not have a DisplayPort connector, you can purchase a video adaptor from HP for your configuration. -
Page 22: Disconnecting Cables
Disconnecting cables You may need to remove the security cable, if one is installed on the rear of the computer. Disconnect the cables from the ports. Adjusting the computer This computer may ship with a fixed-height stand or an adjustable height stand. Adjusting a fixed-height stand This stand allows you to tilt the computer from -5°... -
Page 23: Adjusting An Adjustable-Height Stand
Adjusting an adjustable-height stand This stand allows you to: Adjust the computer height within a range of 110 mm (4.3 in). ● Tilt the computer from -5° to 20° from the desktop. ● Swivel the computer up to 45° to either side. ●... -
Page 24: Installing A Security Cable
Installing a security cable A security cable is a key lock device that has a wire cable attached. You attach one end of the cable to your desk (or other stationary object) and the other end of the cable to the security cable slot on the computer. Secure the security cable lock with the key. -
Page 25: Disconnecting Power
Maintain security over conversations ● Webcam operation On the HP ProOne 600 21.5-inch or HP ProOne 400 23.8-inch computer, raise the webcam to unlock it. ▲ – or – On the HP ProOne 400 20-inch, slide the webcam shutter to the right to open the webcam. -
Page 26: Synchronizing The Optional Wireless Keyboard And Mouse
Synchronizing the optional wireless keyboard and mouse The mouse and keyboard are synchronized at the factory. If they do not work, remove and replace the batteries. If the mouse and keyboard are still not synchronized, follow this procedure to manually re- synchronize the pair. - Page 27 Press the Connect button on the receiver for approximately five seconds. The status light on the receiver will flash for approximately 30 seconds after the Connect button is pressed. While the status light on the receiver is flashing, press the Connect button on the underside of the keyboard for five to ten seconds.
- Page 28 Press the Connect button on the receiver for approximately five seconds. The status light on the receiver will flash for approximately 30 seconds after the Connect button is pressed. While the status light on the receiver is flashing, press the Connect button on the underside of the mouse for five to ten seconds.
-
Page 29: Hardware Repair And Upgrade
The Safety & Comfort Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is also available on the Web at http://www.hp.com/ergo. IMPORTANT: Static electricity can damage the electrical components of the computer or optional equipment. -
Page 30: Removing Batteries From The Optional Wireless Keyboard Or Mouse
Removing batteries from the optional wireless keyboard or mouse NOTE: The wireless keyboard and mouse are optional components. To remove batteries from the wireless keyboard, remove the battery door on the underside of the keyboard (1) and lift the batteries out of the battery compartment (2). To remove batteries from the wireless mouse, remove the battery door on the underside of the mouse (1) and lift the batteries out of the battery compartment (2). -
Page 31: Removing And Installing The Rear Cover
Removing and installing the rear cover Removing the rear cover Place the computer facedown on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage. -
Page 32: Locating Internal Components
Locating internal components Table 3-1 Internal components Internal components Optical disc drive (optional) RTC battery Memory modules Hard drive Removing and installing memory The memory slots on the system board can be populated with up to two industry-standard small outline dual inline memory modules (SODIMMs). -
Page 33: Populating Memory Module Slots
HP offers upgrade memory for this computer and advises that the consumer purchase it to avoid compatibility issues with unsupported third-party memory. Populating memory module slots Refer to the following table to identify the memory module channel locations. Table 3-3... -
Page 34: Installing Memory Modules
Installing memory modules There are two memory slots on the system board. To remove or install memory modules: To locate the memory modules on the system board, see Locating internal components on page To remove a memory module, press outward on the two latches (1) on each side of the memory module, then pull the memory module (2) out of the slot. -
Page 35: Replacing The Rtc Battery
The lifetime of the lithium battery can be extended by plugging the computer into a live AC outlet. The lithium battery is only used when the computer is NOT connected to AC power. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. -
Page 36: Replacing Drives
Replacing drives Replacing a hard drive The 2.5-inch primary hard drive is installed on the right side of the computer. To locate the hard drive on the system board, see Locating internal components on page Removing a hard drive Remove the screw securing the hard drive to the computer. Slide the hard drive away the edge of the computer and lift the hard drive out of the computer. -
Page 37: Installing The Optical Disc Drive
Connect the power and data cables to the hard drive. Align the hard drive and slide it toward the edge of the computer (1) until the hard drive snaps into place, and then secure it with a screw (2). Installing the optical disc drive The optical disc drive is located above the system components. -
Page 38: Appendix A Electrostatic Discharge
● Use a portable field service kit with a folding static-dissipating work mat. ● If you do not have any of the suggested equipment for proper grounding, contact an HP authorized dealer, reseller, or service provider. NOTE: For more information on static electricity, contact an HP authorized dealer, reseller, or service provider. -
Page 39: Appendix B Computer Operating Guidelines, Routine Care, And Shipping Preparation
Computer operating guidelines, routine care, and shipping preparation Computer operating guidelines and routine care Follow these guidelines to properly set up and care for the computer and monitor: Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold. ●... -
Page 40: Optical Disc Drive Precautions
IMPORTANT: If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized HP service provider. Shipping preparation Follow these suggestions when preparing to ship the computer: Back up the hard drive files to an external storage device. Be sure that the backup media is not exposed to electrical or magnetic impulses while stored or in transit. -
Page 41: Appendix C Accessibility
Accessibility HP is working to weave diversity, inclusion and work/life into the fabric of our company, so it is reflected in everything we do. Here are some examples of how we are putting differences to work to create an inclusive environment focused on connecting people to the power of technology throughout the world. -
Page 42: Finding The Best Assistive Technology
HP is committed to increasing accessibility awareness within HP and with our customers and partners. Whether it’s large fonts that are easy on the eyes, voice recognition that lets you give your hands a rest, or any other assistive technology to help with your specific situation—a variety of assistive technologies make HP products easier to use. -
Page 43: Standards And Legislation
Assistive Technologies sorted by impairment type ● Assistive Technologies sorted by product type ● Assistive Technology vendors with product descriptions ● Assistive Technology Industry Association (ATIA) ● Standards and legislation Standards Section 508 of the Federal Acquisition Regulation (FAR) standards was created by the US Access Board to address access to information and communication technology (ICT) for people with physical, sensory, or cognitive disabilities. -
Page 44: United States
United Kingdom ● Australia ● Worldwide ● United States Section 508 of the Rehabilitation Act specifies that agencies must identify which standards apply to the procurement of ICT, perform market research to determine the availability of accessible products and services, and document the results of their market research. The following resources provide assistance in meeting Section 508 requirements: www.section508.gov ●... -
Page 45: Europe
Europe EU Mandate 376 ETSI Technical Report ETSI DTR 102 612: "Human Factors (HF); European accessibility requirements for public procurement of products and services in the ICT domain (European Commission Mandate M 376, Phase 1)" has been released. Background: The three European Standardization Organizations have set up two parallel project teams to carry out the work specified in the European Commission "Mandate 376 to CEN, CENELEC and ETSI, in Support of Accessibility Requirements for Public Procurement of Products and Services in the ICT Domain."... -
Page 46: Useful Accessibility Resources And Links
NOTE: This is not an exhaustive list. These organizations are provided for informational purposes only. HP assumes no responsibility for information or contacts you may encounter on the Internet. Listing on this page does not imply endorsement by HP. -
Page 47: Contacting Support
Time. Customers with other disabilities or age-related limitations who have questions about technical support ● or accessibility of HP products, choose one of the following options: Call (888) 259-5707 Monday through Friday, 6 a.m. to 9 p.m. Mountain Time. –... -
Page 48: Index
28 HP ProOne 400 side 5 HP Assistive Policy 33 HP ProOne 600 2 power HP ProOne 400 HP ProOne 600 bottom 4 connecting 16 components 5 HP ProOne 600 front 2 disconnecting 17 HP ProOne 600 HP ProOne 600 rear 4... - Page 49 23 security cable 16 serial number location 8 setup, order of 9 shipping preparation 32 side components HP ProOne 400 5 HP ProOne 600 3 SODIMM identification 25 location 25 specifications 24 specifications, memory 24 standards and legislation, accessibility 35...