Removing An Adjustable Height Stand - HP ProOne 600 Hardware Reference Manual
Hp proone 600 g4 21.5-inch all-in-one business pc
hp proone 400 g4 23.8-inch all-in-one business pc
hp proone 400 g4 20-inch all-in-one business pc
Hide thumbs
Also See for ProOne 600:
- Illustrated parts & service map (4 pages) ,
- Hardware reference manual (59 pages) ,
- Hardware reference manual (49 pages)
Table of Contents
Advertisement
3.
Rotate the stand down until it clicks into place (2).
Removing an adjustable height stand
To remove the stand:
1.
Remove all removable media, such as optical discs or USB flash drives, from the computer.
2.
Turn off the computer properly through the operating system, then turn off any external devices.
3.
Disconnect the AC power cord from the AC outlet and disconnect any external devices.
4.
Place the computer facedown on a soft flat surface. HP recommends that you set down a blanket, towel,
or other soft cloth to protect the bezel and screen surface from scratches or other damage.
5.
Press the stand release latch.
6.
Rotate the stand away from the computer (1).
7.
Slide the stand hooks out of the computer (2).
Attaching and removing a stand
11
Advertisement
Table of Contents
