Connecting And Disconnecting Cables; Connecting Cables; Connecting A Display - HP ProOne 600 Hardware Reference Manual
Hp proone 600 g4 21.5-inch all-in-one business pc
hp proone 400 g4 23.8-inch all-in-one business pc
hp proone 400 g4 20-inch all-in-one business pc
Hide thumbs
Also See for ProOne 600:
- Illustrated parts & service map (4 pages) ,
- Hardware reference manual (59 pages) ,
- Hardware reference manual (49 pages)
Table of Contents
Advertisement
4.
To attach the computer to a swing arm (sold separately), insert the four 20 mm screws that are supplied
with the computer through the holes on the swing arm plate and into the mounting holes on the
computer.
CAUTION:
third-party mounting solution to the computer, four 4 mm, 0.7 pitch, and 20 mm long screws are
required. These screws are supplied with the computer. Longer screws must not be used because they
may damage the computer. It is important to verify that the manufacturer's mounting solution is
compliant with the VESA standard and is rated to support the weight of the computer. For best
performance, it is important to use the power and other cables provided with the computer.
To attach the computer to other mounting fixtures, follow the instructions included with the mounting
fixture to ensure that the computer is safely attached.
Connecting and disconnecting cables
Connecting cables
1.
Connect the peripheral cables to the appropriate ports.
2.
Connect the power cord to the power connector on the rear of the computer.
Connecting a display
The ports on the rear of the computer allow you to connect up to two displays to the computer.
If you are adding a display that has a DisplayPort port, then no video adapter is required. If you are adding a
display that does not have a DisplayPort port, you can purchase a video adaptor from HP for your
configuration.
DisplayPort adapters and video cables are purchased separately. HP offers the following adapters:
DisplayPort to VGA adapter
●
●
DisplayPort to DVI adapter
To connect a display:
1.
Turn off power to the computer and to the display that you are connecting to the computer.
2.
If your display has a DisplayPort connector, connect a DisplayPort cable directly between the
DisplayPort connector on the rear of the computer and the DisplayPort connector on the display.
This computer supports the VESA industry standard 100 mm mounting holes. To attach a
Connecting and disconnecting cables
13
Advertisement
Table of Contents
