Fluid Pressure Gauges
Attaches to optional regulator outlet.
2 in. (51 mm) dial.
102397
0–3000 psi (0–21 MPa, 0–207 bar MPa)
1/4 npt(m) center back fitting
101696
0–1000 psi (0–7 MPa, 0–70 bar)
1/4 npt(m) bottom fitting
17L706
316 sst
0–3000 psi (0–20 MPa, 0–200 bar)
1/4 npt(m) bottom fitting
UHMW Polyethylene U-Type Packing
108317 (included in Repair Kit 220135)
Use instead of 111796 (ref. no. 9), with abrasive fluids.
Category
Maximum Fluid Inlet Pressure
Regulated Fluid Pressure Range
Normal Factory Preset Range
Maximum Flow Rate
Fluid Inlet
Fluid Outlet (two)
Wetted Parts
Canadian Registration Number (CRN):
Alberta – 0C04874.52
Ontario – 0C4874.5R1
Accessories
Use Only Genuine Graco Parts and Accessories
Technical Data
Data
3000 psi (21 MPa, 207 bar)
Models 206819 and 238926: 1000–3000 psi (7–21 MPa, 70–207 bar)
Model 222405: 0–1000 psi (0–7 MPa, 0–70 bar)
Models 206819 and 238926: 2000–3000 psi (14–21 MPa, 138–207 bar)
Model 222405: 500–1000 psi (3.4–7 MPa, 34–70 bar)
3.5 gpm (13.25 liters/min) with 70 centipoise fluid at 75_F (23_C)
1/4 npt(f)
1/4 npt(f)
Models 206819 and 222405: Tungsten carbide, PTFE,
acetal homopolymer, cadmium and zinc-plated steel, stainless steel, and
chrome-plated stainless steel
Model 26A081: 316 sst 17–4 ph sst, PTFE
Model 238926: Stainless steel, Tungsten carbide, PTFE, acetal
homopolymer
Models 206819, 238926, and 222405
Compression Springs
501510
Converts both models to 1000–2000 psi
(7–21 MPa, 70–138 bar) range.
Red color-coded.
501511
Standard on Model 222405.
Converts Model 206819 to
0–1000 psi (0–7 MPa, 0–70 bar) range.
Blue color-coded.
166986
Standard on Model 206819.
Converts 222405 to 2000–3000 psi
(14–21 MPa, 138–207 bar) range.
Yellow color-coded.
NOTE: Spring 166986 (supplied with Model 206819)
is recommended for 2000–3000 psi (14–21 MPa,
138–207 bar).
306860 11