Table of Contents
Advertisement
Home >
Scan
>
Scan Using the Scan Functions on Your Brother Machine
Scanned Data to a Mapped Network Drive (CIFS) Server
Upload Scanned Data to a Mapped Network Drive (CIFS) Server
Related Models: ADS-1250W/ADS-1700W
To upload scanned data directly to a folder on a Mapped Network Drive (CIFS) server, you must set up a
Scan to Network Profile.
1. Load your document.
2. Press d or c to display [to Network], and press it.
3. Press a or b to select one of the Network server profiles listed.
4. If the Scan to Network profile is not complete, press [Options]. Configure the following settings, and then
press [OK]:
•
[2-sided Scan]
•
[Scan Type]
•
[Resolution]
•
[File Type]
•
[Document Size]
•
[File Size]
•
[Edge Fill For Plastic Card]
•
[Skip Blank Page]
•
[Advanced Settings]
•
To configure other settings, press [Advanced Settings].
•
To save the settings as a shortcut, press [Save as Shortcut].
•
If signed PDF was selected from the [File Type] drop-down list, you must configure the certificate
settings using Web Based Management.
•
[Edge Fill For Plastic Card] is only available when scanning from the Card Slot.
5. Press [Start].
The LCD displays the message [Connecting]. When the connection to the Network server is successful,
the machine starts scanning.
Related Information
•
Scan to Network
>
Scan to Network
> Upload
51
- Quick Links:
- Set up Your Scanner
Hide quick links:
Advertisement
Table of Contents
