Home >
Routine Maintenance
Clean the Sensors
1. Turn off and unplug the machine from the AC power outlet.
2. Open the Top Cover (1) and the Front Cover (2).
2
3. Wipe off the paper dust accumulated on the Document Scanning Position Sensor (1) with a soft lint-free cloth
moistened with water.
4. Wipe off the paper dust accumulated on the Card Sensor (1) with a soft lint-free cloth moistened with water.
1
5. Close the Front Cover and the Top Cover.
Related Information
•
Clean Your Brother Machine
•
Error and Maintenance Indications
>
Clean Your Brother Machine
1
1
> Clean the Sensors
174