Brother ADS-1250W Online User's Manual page 145

Error Message
No Document / Card
No PC found
No Profile found
Not Registered
Remove documents.
Replace Pickup Roller
Replace Separation
Pad
Scheduled Maintenance
Alert
Sending Error
Server Time out
Setting Lock
Cause
• No document or card is loaded.
• The Feed Selector is set incorrectly.
The machine is not connected to your
computer.
No Scan to FTP/SFTP profile or Scan to
Network profile is registered.
(Scan)
The email address or SMTP server
address of the scan destination is not
registered.
(Secure Function Lock)
A user not registered in Secure Function
Lock is accessing the machine.
Auto Start Scan Mode was enabled
while a document was loaded.
Pick Up Roller has been used over
100,000 times.
The Separation Pad has been used more
than 10,000 times.
The Pick Up Roller and Separation Pad
have been used over 5,000 times.
The Scan to FTP/SFTP profile, Scan to
Network profile or Scan to Email Server is
not configured correctly.
The machine was disconnected from the
Scan to FTP/SFTP profile, Scan to
Network profile or Scan to Email Server.
Adding a new shortcut was attempted
while the Setting Lock was turned on.
Action
See Related Information: Upload Scanned
Data to a Mapped Network Drive (CIFS)
Server.
• Load a document or card.
See Related Information:Load
Documents.
• Confirm whether the Feed Selector is
set correctly.
Connect the machine to your computer,
and then try again.
Configure the Scan to FTP/SFTP profile
or the Scan to Network profile before
using Scan to FTP or Scan to Network.
See Related Information: Set up a Scan to
FTP Profile.
See Related Information: Set up a Scan to
SFTP Profile.
See Related Information: Set up a Scan to
Network Profile.
Make sure the email address or SMTP
server address is correctly configured.
Contact your administrator to check your
Secure Function Lock settings.
See Related Information: Secure Function
Lock 3.0.
Remove the document, and then reload it.
Replace the Pick Up Roller with a new
one. Scanning errors may occur if you do
not replace the part.
See Related Information: Replace the
Pick Up Roller.
Replace the Separation Pad with a new
one.
See Related Information:Replace the
Separation Pad.
Clean the Separation Pad and Pick Up
Roller. Paper jams and reduced scan
quality issues may occur if you do not
clean them.
See Related Information: Clean the
Scanner and Rollers.
Make sure the Scan to FTP/SFTP profile,
Scan to Network profile or Scan to Email
Server is configured correctly.
Configure the Network Settings.
Make sure the Scan to FTP/SFTP profile,
Scan to Network profile or Scan to Email
Server is configured correctly.
Configure the Network Settings.
Disable the Setting Lock.
141