Brother ADS-1250W Online User's Manual page 38

•
[Edge Fill For Plastic Card]
•
[Skip Blank Page]
•
[Advanced Settings]
•
[Set New Default]
•
[Factory Reset]
•
[Set New Default]
•
[Factory Reset]
• To configure other settings, press [Advanced Settings].
• To save the settings as a shortcut, press [Save as Shortcut].
• To select [Long Paper (Narrow)] or [Long Paper (Normal)] for [Document Size], use the
following settings:
-
[2-sided Scan]: [Off]
- [Scan Type]: Other than [Auto] ([Color], [Gray] or [Black and White])
- [Resolution]: Lower than 300 dpi
-
[Skip Blank Page]: [Off]
• If signed PDF was selected from the [File Type] drop-down list, you must configure the certificate
settings using Web Based Management.
• [Edge Fill For Plastic Card] is only available when scanning from the Card Slot.
4. Press [Start].
The machine starts scanning, and then the scanned data is saved on the USB flash drive.
Related Information
• Scan Using the Scan Functions on Your Brother Machine
34