3
3.1
Description
3.1.1
Four button keyboard
without display
TS13 key functions
and LED behaviour
User Interface
User Interface
Keyboard
The TS13 basic variant has a four button keyboard unit without display. The
basic variant can be upgraded with a keyboard display unit. Both variants can
be upgraded with purchased options that enable Lock, SpeedSearch and the
RadioHandle interface on the instrument.
Four Button Keyboard Unit
a
b
c
d
0016249_001
☞
The following description of key functions and LED behaviours applies
to the TS13 being connected to a field controller.
Key functions
LOCK
Press to start prism search and lock onto prism.
•
•
If already locked: Press to unlock from prism.
MEAS
Depending on the currently active settings and field control-
•
ler application:
Press to start a measurement or to store a measurement.
ON/OFF
Press for 2 s to turn on the instrument.
•
•
Press and hold for more than 2 s to shut down the instru-
ment.
Press and hold for more than 5 s to reset the sensor.
•
•
Press and hold for more than 8 s to do a hard shutdown.
COM
To toggle through the communication modes, press the key
•
repeatedly.
Communication modes:
RS232
-
-
Bluetooth
Long-range Bluetooth
-
Press and hold for more than 5 s to change between CS con-
•
troller and Geocom connection.
LED behaviours
LOCK
•
Off: Prism not locked.
Solid green: Prism found and locked.
•
MEAS
Off: No active measurement.
•
•
Solid green: Measurement is executed.
e
f
g h
a
b
c
d
e
f
g
h
LOCK key
LED for locking status
MEAS key
LED for measurement status
LED for communication status
LED for power status
ON/OFF key
COM key
33