Supermicro SuperServer E300-9A-8CN8 User Manual page 56

SuperServer E300-9A-8CN8 User's Manual
Maximum Payload
Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E
device to enhance system performance. The options are Auto, 128 Bytes, 256 Bytes, 512
Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
Maximum Read Request
Select Auto for the system BIOS to automatically set the maximum size for a read request
for a PCI-E device to enhance system performance. The options are Auto, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
ASPM Support
Use this item to set the Active State Power Management (ASPM) level for a PCI-E device.
Select Auto for the system BIOS to automatically set the ASPM level based on the system
configuration. Select Disabled to disable ASPM support. Select Force L0s to force all links
to L0s state. The options are Disabled, Auto, and Force L0s.
Warning: Enabling ASPM support may cause some PCI-E devices to fail!
ARI Forwarding
Select Enabled to lift a traditional Device Number restriction when turning a Type1 Configuration
request into a Type0 Configuration request to permit access to extended functions in an ARI
Device immediately below the port. The options are Disabled and Enabled.
CPU SLOT7 PCI-E 3.0 X4 OPROM
Use this item to select the firmware type for the add-on card for this slot. The options are
Disabled, Legacy, and EFI.
KEY-B SATA3/USB3 OPROM
Use this item to select the firmware type for the add-on card for this slot. The options are
Disabled, Legacy, and EFI.
Onboard LAN OPROM Type
Use this feature to select the Onboard LAN Option ROM type. The options are Disabled,
Legacy, and EFI.
Onboard Video OPROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
VGA Priority
Use this feature to select the active video type. The options are Onboard and Offboard.
56