Supermicro SuperServer E300-9A-8CN8 User Manual page 36

SuperServer E300-9A-8CN8 User's Manual
VGA Enable/Disable
Use jumper JPG1 to enable or disable the onboard VGA connector. Refer to the table below
for jumper settings.
BIOS Recovery
Close pins 2-3 of jumper JBR1 for BIOS recovery. The default setting is on pins 1 and 2 for
normal operation. Refer to the table below for jumper settings.
VGA Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
BIOS Recovery
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 BIOS Recovery
36