Supermicro SuperServer E300-9A-8CN8 User Manual page 28

SuperServer E300-9A-8CN8 User's Manual
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to
the table below for pin definitions.
General Purpose I/O Header
JGP1 is a 10-pin general purpose I/O header. Each pin can be configured to be an input or
output pin. The GPIO is controlled via the PCA9554 8-bit GPIO expansion. The base address
is 0xF040(D31:F4).
Disk On Module Power Connector
The Disk-On-Module (DOM) power connector at JSD1 provides 5V power to a solid-state
DOM storage device connected to one of the SATA ports. Refer the table below for pin
definitions.
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
JGP1 Header
Pin Definitions
Pin# Definition
1 +5V +5V
2 Ground Ground
3 GP0 GPP_E0
4 GP1 GPP_F1
5 GP2 GPP_E1
6 GP3 GPP_F2
7 GP4 GPP_E2
8 GP5 GPP_F3
9 GP6 GPP_F0
10 GP7 GPP_F4
DOM Power
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
28