Cli Mode Basics - Lenovo NE1032 Quick Start Manual

CLI Mode Basics
Configuration for the NE1032 is performed through a CLI interface. As a reference:
>​ = unprivileged mode
#​ = privileged mode
(config)#​ = global configuration mode
(config-if)#​ = interface configuration mode
(config-vrf)#​ = virtual routing and forwarding configuration
Upon login you will be in the unprivileged mode. To enter privileged mode:
>​ enable
#
NOTE
You can use ​ ​ ? ​ ​ to display what commands are available in the current mode.
In order to configure the switch we need to enter global configuration mode. This mode is used for settings that
aren't specific to the switch ports.
#​ conf t
(config)#
Configuration of switch ports is performed in interface configuration mode. To return to the previous configuration
level:
(config-if)#​ exit
(config)#
©
​ ​ Scale Computing 2018
mode
5