Connect To The Switch; Over The Network; Console - Lenovo NE1032 Quick Start Manual

Connect to the Switch
Over the Network
By default, the management interface is set to request a DHCP address. If DHCP is available, check your leases on
your DHCP server to determine the IP address of the switch. Using an SSH client, you may log in to the switch over
the network. The default username is ​ a dmin​ , and the default password is ​ a dmin​ .
Console
Using a terminal emulator, such as PuTTY, connect the provided USB adapter to the port shown below.
Set your console settings as follows:
Default baud rate = 9,600 bps
Character size = 8 characters
Parity = none
Stop bits = 1
Data bits = 8
Flow control = none
The default username is ​ a dmin​ and the default password is ​ a dmin​ .
©
Scale Computing 2018 ​ ​
4