Set Dns; Create Vlans; Verify Spanning Tree - Lenovo NE1032 Quick Start Manual

Set DNS
Any internal DNS server that is accessible on your network should work.
(config)#​ ip name-server 10.205.13.3 vrf default
Create VLANs
You may create VLANs individually as follows:
(config)#​ vlan 2
(config-vlan)#​ name
Or, you may create multiple VLANs at once using a range:
(config)#​ vlan 1-10
Verify Spanning Tree
(config)#​ sh spanning-tree
Ensure that the spanning tree protocol supports rapid convergence. By default the NE1032 uses ​ r apid-pvst​ .
VLAN0001
spanning-tree enabled protocol rapid-pvst
ROOT ID priority
address
This bridge is the root
Hello Time
BRIDGE ID priority
address
Hello Time
Interface Role Sts cost
---------------- ---- --- --------- ------------- ----------------------
Ethernet1/1 Desg FWD 2
Ethernet1/2 Desg FWD 2
Ethernet1/3 Desg FWD 2
Ethernet1/4 Desg FWD 2
©
​ ​ Scale Computing 2018
SCALEBACKPLANE
32769
a48c.db96.7f00
2 Max age 20 Forward Delay 15
32769 (32768 sys-id-ext 1)
a48c.db96.7f00
2 Max age 20 Forward Delay 15
Prio.Nbr
128.410001
128.410002
128.410003
128.410004
Type
point-to-point
point-to-point
point-to-point
point-to-point
10