Introduction; Requirements; Connect To The Switch; Over The Network - Lenovo G8124E Quick Start Manual

Introduction
This guide provides general configuration examples. The configurations found here may not be applicable for all
environments. Consult Lenovo's official documentation for further information in regards to your environment's
unique configuration.
Requirements
● A Terminal Emulation program, such as PuTTY.
● (Optional) USB cable.
Connect to the Switch
Over the Network
By default, the management interface is set to request a DHCP address. If DHCP is available, check your leases on
your DHCP server to determine the IP address of the switch. Using an SSH client, you may log in to the switch over
the network. The default username is ​ a dmin​ , and the default password is ​ a dmin​ .
©
Scale Computing 2018 ​ ​
3