Aruba AP-130 Series Installation Manual page 2

2. Attach any necessary cables and/or antennas to the AP. Cables can be fed through the opening above the
metal slider on the bracket.
3. Push the metal slider up to allow the AP to connect.
4. While still pushing the metal slider, align the mounting posts on the bracket with the mouting holes
shown in
Figure 2 Align the AP With the Bracket
5. Once the AP is placed on the bracket, release the metal slider to lock the AP in place as shown in
3.
Figure 3 Mounted AP
2
Figure 2.
Aruba AP-130-MNT-W2 | Installation Guide
Figure