Aruba AP-130 Series Installation Manual

Hide thumbs Also See for AP-130 Series:

Download this manual

Aruba AP-130-MNT-W2

Installation Guide

The AP-130 Series Wall Mount Kit 2 (AP-130-MNT-W2) allows you to mount your AP-130 Series access point

to a flat surface or an electrical gang box. The AP-130-MNT-W2 can attach to several single and dual

gangwall boxes, including US, UK and DIN standardized models.

Package Contents

AP-130-MNT-W2 Mounting Bracket

T8 Torx Security Screw

Installation

1. Begin by attaching the wall mount bracket to the wall as shown in

If installing this kit on a electrical gang box, you may use a different set of screw holes for mounting. Which screw

holes you use will depend on the electrical gang box in your installation.

a. Install any necessary wall anchors. Wall anchors are not included in this kit.

b. Align the screw holes in the mounting bracket with the previously installed anchors or demarcated

screw points.

c. Insert the screws to secure the mounting bracket. Screws are not included in this kit.

Figure 1 Wall Mount Bracket to Wall

0511078-01

| February 2012

Figure

Page 1: Package Contents
Aruba AP-130-MNT-W2 Installation Guide The AP-130 Series Wall Mount Kit 2 (AP-130-MNT-W2) allows you to mount your AP-130 Series access point to a flat surface or an electrical gang box. The AP-130-MNT-W2 can attach to several single and dual gangwall boxes, including US, UK and DIN standardized models.
Page 2 Figure 2 Align the AP With the Bracket 5. Once the AP is placed on the bracket, release the metal slider to lock the AP in place as shown in Figure Figure 3 Mounted AP Aruba AP-130-MNT-W2 | Installation Guide...
Page 3 6. (Optional) Attach the T8 Torx security screw, as shown in Figure 4, for additional security. Figure 4 Security Screw Aruba AP-130-MNT-W2 | Installation Guide...

Ap-130-mnt-w2