Odu And External Antenna Location; Odu Wind Loading - Cambium Networks PTP 550 Series User Manual

System release 4.1.2
Hide thumbs Also See for PTP 550 Series:
Table of Contents

Advertisement

Chapter 3: System planning

ODU and external antenna location

Find a location for the ODU (and external antenna for connectorized units) that meets the
following requirements:
The equipment is high enough to achieve the best radio path.
People can be kept a safe distance away from the equipment when it is radiating. The safe
separation distances are defined in
The equipment is lower than the top of the supporting structure (tower, mast or building)
or its lightning air terminal.
If the ODU is connectorized, select a mounting position that gives it maximum protection
from the elements, but still allows easy access for connecting and weatherproofing the
cables. To minimize cable losses, select a position where the antenna cable lengths can be
minimized. If diverse or two external antennas are being deployed, it is not necessary to
mount the ODU at the midpoint of the antennas.

ODU wind loading

Ensure that the ODU and the structure on which it is mounted are capable of withstanding the
prevalent wind speeds at a proposed PTP 550 site. Wind speed statistics should be available
from national meteorological offices.
The ODU and its mounting bracket are capable of withstanding wind speeds of up to 325 kph
(200 mph).
Wind blowing on the ODU will subject the mounting structure to significant lateral force. The
magnitude of the force depends on both wind strength and surface area of the ODU. Wind
Force (in newtons) = 0.5 × ρ × V
loading is estimated using the following formulae:
o
"ρ" is the density of air = 1.225 kg/m
o
"V" is the wind speed in meters per second,
o
"A" is the projected surface area of the ODU in square meters, and
o
"C
" is the drag coefficient = 1.385.
d
The drag coefficient has been measured when the cover plate or antenna is perpendicular to
the air flow.
Applying these formulae to the PTP 550 ODU at different wind speeds, the resulting wind
loadings are shown in
Table
Table 21 ODU wind loading (newtons)
Type of ODU
Integrated (23 dBi)
Connectorized
Equivalent results in US customary units are shown in
Calculated distances
2
× A × C
d
3
,
29.
Max surface
Wind speed (kilometers per hour)
area (square
225
meters)
0.130
308 N
0.051
169 N
Page 3-23
on page 4-65.
250
275
380 N
460 N
208 N
253 N
Table
30.
Site planning
300
325
547 N
643 N
300 N
353 N

Advertisement

Table of Contents
loading

Table of Contents