Using Qi Wireless Charging; Using Usb Charging Port - iHome iBTW23 Manual

U S I N G Q i W I R E L E S S C H A R G I N G
This unit will wirelessly charge Qi compatible wireless charging
phones. PMA wireless charging system is not supported.
CAUTION: Remove metal protective or magnetic case from phone
before charging. When charging phone, do not place magnetic-striped
or other metal objects on the charger. Doing so could damage the
object or this unit. Qi compatible phones with metallic looking finishes
will charge normally.
Center Qi compatible device with back side down on marked charging
target circle. Check the wireless charging indicator toward the bottom
left of the display.
Rapid blinking icon:
device.
Slow blinking icon:
Solid icon:
U S I N G T H E U S B C H A R G I N G P O R T
A 1 Amp USB port is located on the back of the unit for charging devices
while the unit is connected to AC power. Connect one end of a compatible
USB cable (not included) into the standard USB port on the unit and the
other end into the device you wish to charge. Some devices require higher
amperage USB charging ports. Monitor the charging status of your device.
If the device does not charge, you will need to use the charger that came
with your device.
Device is not charging properly. Reposition
Device is charging properly.
Device is charged (some devices do not support
this feature).
7