Playing Audio Via Aux-In Device; Charging Devices With The Usb Port - iHome iBT290 Instruction Manual

Playing your Aux Audio Device
1. Connect one end of a standard aux audio cable (not included) to the aux jack on the back of
the unit and connect the other end to the headphone jack or aux-out jack on your audio
device.
2. Press and release the Mode Button as needed to put the unit in Aux-in mode.
3. Use controls on your device to play and pause audio and to navigate tracks and menus.
4. Press the or Buttons to adjust the unit volume.
5. To turn o the unit, press and release the
too.
DC
Charging a Device with the USB Port
A 1 Amp USB port is located on the back of the unit for
charging devices while the unit is connected to AC power.
Connect one end of a compatible USB cable (not included)
into the standard USB port on the unit and the other end into
the device you wish to charge. Some devices require
proprietary USB charging ports or cables. Monitor the charging
status of your device. If the device does not charge, you will
need to use the charger that came with your device.
7.5V 2A
usb charging aux-in
Using the
Button. Make sure to turn o your audio device,
Mobile Phone PC/Tablet Game Devices
13
iBT290
iPod Laptop MP3/MP4
NOTE: Unit must be
plugged into working
outlet to charge
devices
DC 7.5V 2A
usb charging aux-in