Setting An Alert Notification For Ready Link Calls; Setting The Speakerphone For Ready Link Calls - Sanyo SCP-2400 User Manual

Setting an Alert Notification for Ready Link Calls

Your phone can alert you with an audible tone when you
receive a Ready Link call.
To set alerts for Ready Link calls:
1.
Select
2.
Select Ready Link Calls or R-Link Missed.
3.
Use the navigation key to select Once or Repeat Alert for
Ready Link Calls; or Once, Repeat Alert, or Off for R-Link
Missed.
Tip:
You can also set alerts using the Alert Notification menu. (See "Alert
Notification"on page 56.)

Setting the Speakerphone for Ready Link Calls

You can set your phone to use speakerphone mode for Ready
Link calls. By default, the speakerphone is set to on.
To set the speakerphone on or off:
Select
or Off.
Note:
If the phone's ringer volume is set to Vibrate, Ringer Off, or Silence All,
the speakerphone turns off. Press
152 Section 2I: Using Ready Link
> Settings > Ready Link > Sounds > Alerts.
> Settings > Ready Link > Speakerphone > On
to turn the speakerphone mode on.