Table of Contents
Advertisement
To cancel a stored speed dial number:
1.
Select MENU/OK > Contacts > Speed Dial #s.
2.
Select the stored speed dial number you want to cancel and press MENU/OK.
3.
Select Reset.
Selecting a Ringer Type for an Entry
You can assign a ringer/image type to a Contacts entry so you can identify the caller by the
ringer or image type.
To select a ringer type for an entry:
1.
Select MENU/OK > Contacts > Find/Add Entry
2.
Select the entry you wish to set the incoming ringer or image and press MENU/OK.
3.
Press Options (right softkey) > Edit.
4.
Select the menu under Normal Ringer by scrolling down and press MENU/OK.
5.
Select your desired ringer type and then press MENU/OK.
6.
Press Save (left softkey).
Secret Contacts Entries
You can hide an entry's phone number(s) and require your lock code to edit the entry by making
it secret. The entry name is still displayed, but the entry's phone number is replaced by
"<Secret>."
To make an entry secret:
1.
Select MENU/OK > Contacts > Find/Add Entry
2.
Scroll to the Contacts entry you want to tag as secret.
3.
Press Options (right softkey) > Set Secret.
4.
Enter 4 digits lock code.
5.
Select On.
To make an entry public, select Off during step 5 above.
Tip: If you can't recall your lock code, try using the last four digits of either your Social Security
number or PCS Phone Number or try 0000.
Dialing PCS Services
You must be in digital mode to access PCS Services.
To dial a service:
1.
Select MENU/OK > Contacts > Services
2.
Select Customer Service, Dir Assistance, Account Info, or Voice Command and press
MENU/OK.
3.
Press TALK .
32
Advertisement
Table of Contents
