Recycling Electrical And Electronic Equipment, Weee; Recycling The Transport Material; Disposal Of The Product - ABB PFTL 101 User Manual

1.3.2
1.3.3
1.3.4
1.3.4.1
6
Pressductor PillowBlock Load Cells, Horizontal Measuring PFTL 101, User Manual

Recycling Electrical and Electronic Equipment, WEEE

The crossed – out wheeled bin symbol on the product(s) and / or accompanying documents
means that used electrical and electronic equipment (WEEE) should not be mixed with general
household waste.
If you wish to discard electrical and electronic equipment (EEE), in the European Union, please
contact your dealer or supplier for further information.
Outside of the European Union, contact your local authorities or dealer and ask for the correct
method of disposal.
Disposing of this product correctly will help save valuable resources and prevent any potential neg-
ative effects on human health and the environment, which could otherwise arise from inappropriate
waste handling.

Recycling the Transport Material

ABB designs all transport material to be recyclable where practical. The recycling of the transport
material depends on the material type and availability of local recycling programs.
After receiving the system into the site, the package and the transportation locking have to be
removed. Recycle the transport material according to local regulations.

Disposal of the Product

When the product is to be disposed, it should be dismantled and the components recycled
according to local regulations.
Dismantling and Recycling of the Product
Dismantle and recycle the components of the product according to local regulations.
CAUTION
Some of the components are heavy! The person who performs the dismantling of
the system must have the necessary knowledge and skills to handle heavy
components to avoid the risk of accidents and injury from occurring.
• Load cell: These parts are made of structural steel, which can be recycled according to
local instructions. All the auxiliary equipment, such as cabling or hoses must be removed
before recycling the material.
1 Introduction
3BSE009965R0401 en Rev E