ABB PFTL 101 User Manual page 2

USE OF SYMBOLS
This publication includes the following symbols with information regarding safety or other important information:
NOTICE
The information in this document is subject to change without notice and should not be construed as a commitment by ABB
AB. ABB AB assumes no responsibility for any errors that may appear in this document.
In no event shall ABB AB be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising
from the use of this document, nor shall ABB AB be liable for incidental or consequential damages arising from use of any
software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without ABB AB's written permission, and the contents
thereof must not be imparted to a third party nor be used for any unauthorized purpose.
The software described in this document is furnished under a license and may be used, copied, or disclosed only in accord-
ance with the terms of such license.
CE-marking
This product meets the requirements specified in the RoHS Directive 2011/65/EU, EMC Directive 2014/30/EU and the Low
Voltage Directive 2014/35/EU provided the installation is carried out in accordance with the instructions given in this manual.
© Copyright 2004-2018 ABB. All rights reserved.
CAUTION
Caution icon indicates important information. Risk of damage to equipment, property or software.
DANGER
Danger icon indicates a hazard which could result in personal injury or even death.
ELECTRICAL
Electrical warning icon indicates the presence of a hazard which could result in electrical shock.
ESD
ESD icon indicates that electrostatic discharge precautions are needed.
Information
Information icon alerts the reader to relevant facts and conditions.
Tip
Tip icon advise how to design your product or how to use a certain function.