Disposal; Information On Weee Directive 2012/19/Eu (Waste Electrical And Electronic Equipment); Use In Potentially Explosive Atmospheres - ABB Sensyflow FMT400-VTS Commissioning Instructions

1.9

Disposal

This product is manufactured from materials that can be reused by specialist recycling
companies.
1.9.1

Information on WEEE Directive 2012/19/EU (Waste Electrical and Electronic Equipment)

This product is not subject to WEEE Directive 2012/19/EU or relevant national laws
(e.g., ElektroG in Germany).
The product must be disposed of at a specialist recycling facility. Do not use municipal garbage
collection points. According to the WEEE Directive 2012/19/EU, only products used in private
applications may be disposed of at municipal garbage facilities. Proper disposal prevents
negative effects on people and the environment, and supports the reuse of valuable raw
materials.
If it is not possible to dispose of old equipment properly, ABB Service can accept and dispose of
returns for a fee.
2

Use in potentially explosive atmospheres

The device is available in a hazardous area design for zone 2 and zone 22 and is supplied with
a manufacturer's declaration in accordance with ATEX. When operating these devices in the
approved range, only the data and information contained in this manufacturer's declaration shall
apply (see Appendix).
WARNING - General risks!
It is not permitted to use the devices in zone 1 / 21 or in zone 0 / 20.
CI/FMT400-VTS/VTCS-EN Sensyflow FMT400-VTS, FMT400-VTCS
Use in potentially explosive atmospheres
EN - 9