Touchpad Click Board - HP 14 Maintenance And Service Manual

TouchPad click board

Description
TouchPad click board
TouchPad board cable
TouchPad click board cable
Before removing the TouchPad click board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the rubber feet (see
5. Remove the bottom cover (see
6. Remove the battery (see
To remove the TouchPad click board:
1. Disconnect the TouchPad cable (1) from the system board, and then disconnect from the TouchPad click
board cable (2) TouchPad.
2. Remove the two Phillips M2.0×2.0 screws (3) that secure the TouchPad click board to the computer.
44 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Computer feet on page
Bottom cover on page
Battery on page 35).
31).
33).
Spare part number
L24486-001
L23184-001
L24485-001