HP 14 Maintenance And Service Manual page 66

5. Remove the bottom cover (see
6. Remove the battery (see
To remove the display assembly:
1. Disconnect the display cable from the system board(1).
2. Disconnect the wireless antenna cables from the WLAN module (2).
3. Position the computer so it is open with the display hanging off the table (1).
4. Remove the six Phillips M2.5×6.0 screws (2) from the display hinges.
58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 35).
33).