Memory Module - HP 14 Maintenance And Service Manual

Memory module

Description
SODIMM, 4 GB, 2400 MHz, 1.2 v, DDR4
SODIMM, 8 GB, 2400 MHz, 1.2 v, DDR4
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the rubber feet (see
5. Remove the bottom cover (see
6. Remove the battery (see
To remove a memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Computer feet on page
Bottom cover on page
Battery on page 35).
31).
33).
Spare part number
862397-859
862398-855