Preface - Microchip Technology MPLAB User Manual

All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a "DS" number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
"DSXXXXXA", where "XXXXX" is the document number and "A" is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before you use the
MPLAB Starter Kit for Serial Memory Products. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Warranty Registration
• Recommended Reading
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the starter kit as a programmer and debug tool for
serial memory products and their capabilities. The manual layout is as follows:
• Chapter 1. Introduction – This chapter introduces the starter kit and provides an
overview of its features.
• Chapter 2. Using the Memory Starter Kit – This chapter describes the Memory
Starter Kit functionality.
© 2008 Microchip Technology Inc.
MPLAB
SERIAL MEMORY PRODUCTS

Preface

NOTICE TO CUSTOMERS
®
STARTER KIT FOR
USER'S GUIDE
®
IDE online help.
DS22087B-page 1