Advertisement
User Operating Instructions
Repeat above steps and go through all 24 hours
until dAY1
(or programmed day)
Repeat as above and go through copying each day.
Once you have gone through all the days the
display will show the set temperature as you have
programmed.
is displayed again.
Setting the Weekly Program -
If you wish to change the temperature level from Noon
(Economy) to Sun(Comfort) for this 30 minute segment
00:30 to 01:00 then Press the sun (comfort)
display will now flash between the time interval 00:30 and
Sun(Comfort).
Now Press the Plus
minute segment. The display will now flash between the
time interval 00:30 and this temperature level
Repeat the above steps, selecting either the Sun(Comfort)
temperature or Noon(Economy) temperature and pressing
the Plus button to move to the next 30 minute segment.
You repeat this until you go through all the 30 minute
segments and the display shows dAY1 again.
At this point you can either Press the Plus button and
repeat the above for day 2 and the other days or copy day1
to day2, day2 to day3, day3 to day4, and so on.
Setting the Weekly Program -
To copy dAY1 to dAY2.
Press and Hold the Plus
to day 2) is displayed and then release. After a short time
the display will show dAY1 again.
Press and Release the
is now displayed.
To copy dAY2 to dAY3.
Press and Hold the Plus
to day 3) is displayed and then release. After a short time
the display will show dAY2 again.
Press and Release the
is now displayed.
5
continued
button to move to the next 30
Copying Days
(while on the day you want to copy)
button until CP12(copy day 1
button to move to day 2, dAY2
button until CP23(copy day 2
button to move to day 3, dAY3
button. The
Advertisement
