Hazard Identification Information; Unit Description - Daikin RoofPak RPS Series Installation And Maintenance Manual

Roof mounted singlezone heating and cooling units with microtech iii unit controllers
Table of Contents

Advertisement

Hazard Identification Information

Capacitor hazardous voltage! Failure to disconnect power
and discharge capacitors before servicing will result in
serious injury or death.
Warnings indicate potentially hazardous situations, which can
result in property damage, severe personal injury, or death if
not avoided.
Cautions indicate potentially hazardous situations, which can
result in personal injury or equipment damage if not avoided.

Unit Description

Typical Component Locations
Figure 2
shows an RPS/RDT/RFS/RCS unit.
atypical RPS unit with the locations of the major components.
Figure 4
shows a typical RDT unit with the locations of the
major components.These figures are for general information
only. See the project's certified submittals for actual specific
dimensions and locations.
Figure 2: RPS/RDT/RFS/RCS Unit
IM 926-3 • ROOFPAK APPLIED SYSTEMS
DANGER
WARNING
CAUTION
Figure 3
shows
R P S / R D T
R F S
4
Introduction
R C S
www.DaikinApplied.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roofpak rcs seriesRoofpak rdt seriesRoofpak rfs series

Table of Contents