Control Panel
The unit control panels and their locations are shown in
the following figures. These figures show a typical unit
configuration. Specific unit configurations may differ slightly
from these figures depending on the particular unit options.
Figure 11: Control Panel Locations
Prop exhaust/Return Fan
(optional)
(
not shown)
VFDs, line reactors, and
manual bypass
(optional)
Figure 12: Typical Main Control Panel, 015C - 030C, 460 Volt
IM 926-3 • ROOFPAK APPLIED SYSTEMS
Electric heat
control panel
(optional)
Main control panel
Supply fan
section
10
Introduction
Condenser
section
www.DaikinApplied.com