Aaeon PFM-530I Manual page 38

P C / 1 0 4 M o d u l e
The PFM-530I comes with a CD-ROM which contains most
of drivers and utilities of your needs.
We recommend that the system driver installation
procedure must be performed first.
4.1 Installation:
Applicable for Windows 98SE
1. Insert the PFM-530I CD-ROM into the CD-ROM Drive.
2. Click on Start button, select the Settings, and then click on
the Control Panel icon.
3. Double click on the Add/Remove Hardware icon and Add
New Hardware Wizard will appear. Click on the Next button.
4. Select Search for the best driver for your device
(Recommended) and click on the Next button.
5. Select Specify a location, click on Have Disk button then key
in the CD-ROM path and specify component drivers and OS
folders. Then click on the Next button.
6. The Wizard shows that Windows driver file search for the
device: (For example, VGA devices of the board). Click on the
Next button.
7. The system will ask you to insert Windows 98 CD Diskette.
Click on the OK button to insert Diskette and key in path.
8. Click on the OK button.
9. Click on the Finish button to finish installation process. And
allow the system to reboot.
Chapter 4 Driver Installation
4-2
P F M - 5 3 0 I