Operating Location; Damage Due To Improper Use; Warranty / Repairs - ADS-tec IRF2000 series Instruction Manual

IRF2000 series – DNV GL variant

3.2 Operating location

This device is designed for maritime solutions use. Make certain that the specified environmental
conditions are maintained at all times. Use in non-specified environments, i.e., in explosive
atmospheres or at extreme elevations, is prohibited.
ATTENTION
Risk of short circuit!
To prevent the formation of water condensate, the device may be turned on only
after it has reached the specified ambient temperature. This also applies if the
device is exposed to extreme temperature fluctuations.
To avoid overheating in operation:
The device must not be exposed to direct radiation by sunlight or any other light
or heat source.

3.3 Damage due to improper use

Should the control system have evident signs of damages caused, e.g., by improper operation or
storage conditions or due to improper use or handling, the device must be shut down immediately.
Ensure that it is secured against being started up accidentally.

3.4 Warranty / repairs

During the device warranty period, any repairs must only be performed by the manufacturer or by
service personnel that has been authorised by the manufacturer.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
12