Safety Instructions - ADS-tec IRF2000 series Instruction Manual

IRF2000 series – DNV GL variant

3.1 Safety instructions

ATTENTION
To prevent damage to the device, all cable lines (power supply, interface cables)
must be only be connected while the device is switched off.
ATTENTION
All installation work performed on the device must be performed only under safe,
secure and de-energised conditions.
CAUTION
Warning - hot surface
Protective gloves must be worn when handling devices with ambient
temperatures of 50 °C and higher.
Disregarding this warning can result in burn injuries or damage to property.
Recommendation for use:
Always adhere to the safety measures applicable when handling components at risk
of being damaged by electrostatic discharges.
(DIN EN 61340-5-1 / DIN EN 61340-5-2)
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
11