IRF2000 series – DNV GL variant
5.2.3 Top-hat rail mounting
The device is placed on the top-hat rail obliquely (1) and secured to the bottom by pressing lightly (2).
The device must noticeably engage in the top-hat rail.
Fig. 4
To release the device from the top-hat rail, proceed in the reverse order.
Recommendation for use:
When removing, take care not to damage the top-hat rail adapter of the device.
ATTENTION
Damage to the device due to vibrations
The device could be damaged by horizontal vibrations.
The device must be fixed adequately in order to protect it from vibrations.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
22