Notes; General Remark; Limitation Of Liability - ADS-tec IRF2000 series Instruction Manual

IRF2000 series – DNV GL variant 4

1 Notes

1.1 General remark

This instruction manual is intended to ensure safe and efficient handling and operation of IT
Infrastructure products.
The instruction manuals must be read carefully by personnel before commencing any type of work.
All of the safety notices and handling instructions given in the manual must be obeyed in order to
ensure that work is carried out safely.
Operation of the system is subject to the laws and regulations which are applicable in the respective
country at national, federal, European and international level.
The generally accepted rules of technology, usually in the form of standards, directives, regulations,
conditions and technical rules specified by national and federal organisations as well as trade
associations and committees for the field of specialisation concerned, shall apply.
Figures used in this instruction manual are provided for basic understanding and may differ from the
actual design.
The operator/operating company is independently responsible for compliance with and observance of
any subsequently introduced technical innovations or new legal requirements, as well as for all usual
obligations of the operator/operating company.
The original version of this instruction manual was written in German. All non-German versions of this
instruction manual are translations of the German instruction manual.

1.2 Limitation of liability

ads-tec GmbH shall not be liable for personal injury, property damage or damage caused to the product
as well as consequential damage that is/was the result of non-compliance with this instruction manual,
improper use of the product, repairs and other actions on the product by unqualified specialists and
specialists not certified by ads-tec GmbH, or that is/was the result of using unapproved replacement
parts.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany