Putting Into Operation; Initial Configuration - ADS-tec IRF2000 series Instruction Manual

IRF2000 series – DNV GL variant

7 Putting into operation

7.1 Initial configuration

Recommendation for use:
For the initial configuration, a connection to a PC is required.
Connecting the 24 VDC power source
The device can be powered with a 24 VDC (3-pin plug) power source. The corresponding plug is
included in the scope of delivery of the device.
Connect the device with the appropriate power source.
Connecting the RJ45 network cable
When placing into operation for the first time, a connection is required between the device and a PC via
an RJ45 network cable.
Connect the device to a PC:
Device LAN connection  PC LAN connection
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
30