Operation Stop/Start Of Designated Loop No - Mitsubishi Electric MELSEC-Q series Programming Manual

Qna programming manual (pid control instructions)
Hide thumbs Also See for MELSEC-Q series:
Table of Contents

Advertisement

Operation stop/start of designated loop no.

Applicable CPU
QCPU
Programmable controller CPU
Basic
High Performance
*1
*2
*1 First five digits of serial No. are 04122 or later
*2 First five digits of serial No. are 05032 or later
[SET DATA]
■Description and data type
Set Data
Description
(n)
Loop number at which start/stop is to be executed
■Usable device
Set Data
Usable Devices
Internal Devices
(System, User)
Bit
Word
(n)
[FUNCTION]
■S.PIDSTOP, SP.PIDSTOP
• Stops the PID operation for the loop number designated by (n). The loop stopped by the S(P).PIDSTOP instruction does
not resume PID operation even if the S(P).PIDINIT instruction is executed.
• Retains the operation data during the stop.
■S.PIDRUN, SP.PIDRUN
• Starts the PID operation of the loop No. specified by (n). This instruction is designed to re-execute PID operation of the loop
No. that has stopped with the S(P).PIDSTOP instruction.
• This instruction will be ignored if the instruction is executed for the loop No. that is currently running PID operation.
[OPERATION ERRORS]
An operation error will occur and the error flag (SM0) will be turned ON in the following cases.
Error code
Description
4100
When the loop number designated by (n) does not exist.
4100
When (n) is outside the range 1 to 8. (Basic model QCPU)
4100
When (n) is any other than 1 to 32. (High Performance model QCPU, Redundant CPU, Universal model QCPU, LCPU)
4103
When the S(P).PIDINIT and S(P).PIDCONT instructions have not been executed before execution of the S(P).PIDSTOP instruction.
4103
When the S(P).PIDINIT and S(P).PIDCONT instructions have not been executed before execution of the S(P).PIDRUN instruction.
Process CPU
Universal
File Register
MELSECNET/10 (H)
Direct J\
Bit
Word
8 INCOMPLETE DERIVATIVE PID CONTROL INSTRUCTIONS AND PROGRAM EXAMPLES
LCPU
Redundant CPU
Data Type
16-bit binary
Special
Index
Function
Register Zn
Module
U\G
8.1 PID Control Instructions
QnA
Q4AR
8
Constant
Other
K, H
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec-qna seriesMelsec-l series

Table of Contents